v.a.g manual tyre pressure sensor configuration TPMS system

2005 onwards
important. plesae ensure the vehicle have a good battery leaving the ignition switched ON will result in the vehicle battery becoming discharged!!!. aux battey power (charger) may be required.

1. With the vehicle stationary, switch the ignition to the ON for 20 minutes.
2. After 20 minutes the tyre pressure sensor control module will enter into configuration mode.
3. Switch the ignition to the "OFF" position
4. Start and drive the vehicle for at least 5-10 minutes with a minimum speed of 20mph.
5. The Tyre pressure monitoring system will then recognise the new sensor signals, and the warning light in the instrument cluster will now hopefully be out.